Sedikit Info Seputar
Guide | How to Flash Firmware Motorola DROID RAZR M
Terbaru 2017
- Hay gaes kali ini team Informasi Seputar Android, kali ini akan membahas artikel dengan judul Guide | How to Flash Firmware Motorola DROID RAZR M, kami selaku Team Informasi Seputar Android telah mempersiapkan artikel ini untuk sobat sobat yang menyukai Informasi Seputar Android. semoga isi postingan tentang
Artikel flash motorola, yang saya posting kali ini dapat dipahami dengan mudah serta memberi manfa'at bagi kalian semua, walaupun tidak sempurna setidaknya artikel kami memberi sedikit informasi kepada kalian semua. ok langsung simak aja sob
Judul:
Berbagi Info Seputar
Guide | How to Flash Firmware Motorola DROID RAZR M
Terbaru
link: Guide | How to Flash Firmware Motorola DROID RAZR M
Berbagi Guide | How to Flash Firmware Motorola DROID RAZR M Terbaru dan Terlengkap 2017
Guide | How to Flash Firmware Motorola DROID RAZR M.
#1 Step. Preparation
- Flashing process will delete or erase all data stored in Motorola DROID RAZR M internal memory, So, you must back up it first.
- During flashing process will drain your battery capacity, So, don't let your battery empty or at low state.
- Always use original USB cable to connect your Motorola DROID RAZR M to the computer.
- Motorola DROID RAZR M driver should installed correctly on your computer or laptop. You can download this driver via this link below.
- Now you must download and install RSD lite Multi Flash tool from here.
- Now, download Motorola DROID RAZR M firmware file.
- Motorola RAZR M XT902.
- Motorola RAZR M XT905.
https://androidmtk.com/download-motorola-usb-drivers
http://rsdlite.com/rsd-lite-download/
https://firmware.center/firmware/Motorola/RAZR%20M/Stock/XT902/
https://firmware.center/firmware/Motorola/RAZR%20M/Stock/XT905/
#2 Step. Flashing Guide.
- Now, boot Motorola DROID RAZR M device to bootloader mode. How to do it ?
- Power off the Motorola DROID RAZR M, by press and hold power button for a seconds, it will completely turn off the device.
- Now, press and hold both volume down + volume up button.
- Now, connect your Motorola DROID RAZR M to the computer via USB cable.
- Make sure your Motorola DROID RAZR M successfully detected on your computer via bootloader mode.
- If failed, try to use original USB cable or change your computer port.
- Now, Open RSD Lite software from start menu.rsd lite flash tool
- Then, click the button assigned with red circle show at picture above to load Motorola DROID RAZR M firmware.
- Firmware file should have this extensions (*.xml, *.shx, *.sbf, *.hs, etc)
- Once your firmware successfully load, RSD lite should look like picture shown below.rsd lite
- Now click start button.
- Flashing process will start automatically without your interference.
- Wait a while until flashing your Motorola DROID RAZR M finish.